header1

brunox® epoxy
Anticorrosion-system

Application and effect

• rust neutralizer
• epoxy primer

for
the industrial maintenance of structures, plants, machines, vehicles etc.
BRUNOX® epoxy is the patented Anticorrosion-system on an epoxy-resin base. The amber-coloured, clear liquid forms a metal-organic iron complex with the neutralized rust. This black, very compact and resistant protective layer, which is formed, guarantees long-term corrosion protection and is at the same time a perfect primer coat because of the epoxy-resin components. It is most suitable for overhauling machines, plants, vehicles. Because of its high penetration into the rust pores and its perfect film formation (no brush traces) it guarantees a high level of effectiveness and further treatment.

Remove loose rust, grease, dirt and paint residues infiltrated with rust with a wire brush, grinding wheel etc.. BRUNOX® epoxy is applied in 2-3 coats to the remaining porous rust with a brush, roller, spray gun or in several coats from the handy CFC free BRUNOX® epoxy spray can.

BRUNOX® epoxy is very suitable for dipping and sealing closed containers.
A top coat must then be applied.

Properties

BRUNOX® epoxy is • free from heavy metals and •from mineral acid
BRUNOX® epoxy can •be stored for an unlimited period in well sealed bottles and •be thinned with acetone

Physical Properties

BRUNOX® epoxy – Anticorrosion-system -

Appearance

 

amber, clear solution

Expected
Coverage

 

approx. 15 m2/l per 1 coat

Specific Gravity

 

1,0 ± 0,1 kp/dm3

Dilutable

 

up to 10% with acetone

Viscosity (20oC)

approx. 118 centistokes
Spray: approx. 37 centistokes

Consistence of the film

resistant black epoxy primer layer

Flash Point

 

< 55 °C

Cleaning of the brushes

brush can be cleaned 
- immediately with water,
- otherwise with thinner
airless gun can be cleaned with acetone

Heat Resistance

Can be stoved at up to 180 °C during 10 minutes, constantly 80 °C

Solid Content

approx. 25%
spray approx. 16%

pH-Value

4 – 4.5

Drying Time

dust-dry:
after approx. 1 h
dry to apply second coat:
after approx. 3-6 h
dry to apply top coat:
depends on temperature, humidity and thickness of the layers.
After one hour ( 20 °C) the drying process can be forced by heating lamp.
If you will become no traces if you press your nail on the layer it is ready to apply a top coat

Film Property

excellent penetration

Film Thickness

approx. 50 my
min. 2 coats
spray approx. 3-4  coats

 

PDF Further information can be obtained from the manual
      GB-FR-NL-IT-ES-PT-GR-NO-DK-SE-FI-RU-CZ-LV-LTl

PDF BRUNOX-Epoxy-Flyer-FR-NL-GB_FI-IT-RU
PDF BRUNOX-Epoxy-Advantages

back to HOME
Brunox.com