brunox® turbo-spray®
5 function - spray with Turboline

• maintenance •cleaning • repair works
• production • storage • transportation

of machines, precision tools, semi-finished and finished products, vehicles, plants and electrical instruments of all kinds

BRUNOX® Turbo-Spray®, the only multi-function-spray with the additive TUROBLINE which guarantees a high capillary effect and the best coverage (100 – 120 m2/l).
BRUNOX® Turbo-Spray® is sprayed on to metal surfaces, displaces water and provides protection against humidity and aggressive environmental influences such as acid atmospheres, chimney gas-steams etc.. By applying  BRUNOX® Turbo-Spray® an invisible, compact 1 – 2 my thick non-hardening anti-corrosive film is formed, providing reliable protection.
BRUNOX® Turbo-Spray® can be removed without difficulty with cleaning materials (tensides).

Application and effect


BRUNOX® Turbo-Spray® is a long-term lubricant based on a balanced mixture of hydrocarbons with the additive TURBOLINE.

Creep oil / Rust loosener

BRUNOX® Turbo-Spray® is a multi-component lubricant which has an excellent penetration effect. Therefore it is capable of penetrating into finest hair-chaps and spaces and, for example, loosens tightened screws in a very short time. It loosens rust and frees sticky mechanisms.


BRUNOX® Turbo-Spray® guarantees complete corrosion protection and also conservation of hollow spaces. The hydrocarbon mixture which is responsible for this guarantees both a compact protection film and also the necessary film thickness which displaces any humidity. It forms a clear, invisible, non-hardening film which does not need to be removed in most cases. (Exception: painting). This film provides temporary protection against corrosion (approx. 6 months) and has a dirt repelling effect.

Cleaning agent

BRUNOX® Turbo-Spray® penetrates and removes mineral and organic dirt so that spots of (almost) all kinds (e.g. tar, brake dust, adhesive residues etc.) can be easily wiped off. It neutralizes hand sweat and also protects aluminum, copper, brass, chromium plated and galvanized sheet metal and stainless steel.

Contact spray

BRUNOX® Turbo-Spray® has a very low surface tension and a corresponding adhesion to metals so that leak currents will be prevented and humidity which has penetrated will immediately be displaced. It is suitable for the corrosion protection of electrical contacts in low-voltage engineering. Before spraying on electrical or electronic equipment, switch off the devices. The very high dielectric strength (UD=45KV/cm) also allows the application in connection with very sensitive (high-impedance) circuits. This property is particularly useful with electrical contacts and short circuits can be eliminated and prevented.



BRUNOX® Turbo-Spray® contains • no silicone, • no PTFE • no graphite
BRUNOX® Turbo-Spray® behaves neutral against • varnish, leather, wood, rubber, plastic and fabric
BRUNOX® Turbo-Spray® contains • just 3% propellant (CO2), i.e. 97% active substance
BRUNOX® Turbo-Spray® has • a flash point of 78oC

Physical Properties

BRUNOX® Turbo-Spray 5- function-spray with TURBOLINE –



Film Thickness

1 – 2 my

Specific Gravity

0,82 ± 0,02 g/cm3

Expect Coverage

approx. 100 – 120 m2/l

Viscosity (20°C)

6.5 mPas (bulk)
6.5 mPas (aerosol)


Bruggertest DIN 51347
23 N/mm2  


78 °C

Consistence of the film

Film non-hardening

Heat Resistance

up to 160 °C short time
up to 125 °C permanent

Dielectric Strength

UD: 45 KV eff-ED: 182 KV eff/cm

Freezing Point

-51 °C

Drying Time

evaporation of the solvents within 2-4 h. H depending on weather conditions



Corrosion Protection

up to 12 months indoor

Film Property



NSF H2 registered
N° 147256 (aerosol)
contains no silicon, PTFE, graphite


PDF Further information can be obtained from the technical  data sheet.
PDF BRUNOX Turbo-Spray bike-care-leavlet
PDF BRUNOX Turbo-Spray flyer
PDF BRUNOX Turbo-Spray NSF-authorization
PDF BRUNOX Turbo-Spray advantages

back to HOME